Best Plasma Cutters with built-in Air Compressor

Best Plasma Cutters with built-in Air Compressor Reviews

Sometimes, you have to use your plasma cutter outdoors, but you can access only a power source but not a separate air compressor.

The plasma cutter manufacturers have solved this issue by creating the best plasma cutters with built-in compressor, which only requires a power connection to work.

Now, the issue is that there are numerous models of plasma cutters with built-in compressors available in the market.

It is challenging for you to choose the best plasma cutter according to your need. You pay a lot for these cutters so; you must pick the best one.

To make this selecting process more comfortable for you, we have tried and reviewed five of the best plasma cutters with built-in compressor available in the market.

Best Plasma Cutters with built-in Air Compressor (TOP PICKS)

ProductRatingInput PowerOutput PowerDuty Cycle
Thermal Arc 1-1110-1A++++120V 50/60Hz15A35%
Hypertherm Powermax30A+++++110-240V15-30A

 

35%
Forney 317 250 P+A+++120V20A35%
Lotos LTP5000D Non-Touch Pilot ArcA++++110-220V

50/60Hz

50A60%
Hobart Airforce 250ci A+++120V20A

 

35%

 Thermal Arc 1-1110-1

Why choose Thermal Arc 1-1110-1?

This model is a light, portable, light, and mighty little machine with a built-in compressor. It weighs only 29 pounds and has a supportive handle, which makes this cutter easy to use and carry anywhere.

The best thing about it is that even being so lightweight, this cutter has tremendous cutting power at a fast speed.

Input 

This model is designed to cut through 3mm or 1/8″. But it’s reducing capacity can reach up to 5 millimeters or 3/16″.

This model can work on a single voltage using a plug of 15 amp. According to its manufacturing company’s claim, this product is 25% better than the other products of this type in the market.

Torch and Other topographies

For the beginners, this model comes with a twenty feet long cord. This length is useful for various tasks, both indoor and outdoor.

You can use the trigger easily while holding the torch without disturbing your flow of work. This device works for the rusted and painted metal sheets as well.

The powerful light of this plasma cutter is capable enough to fulfill your requirements as a hobbyist or a professional metal cutter.

Pros

  • This model has a pilot Arc, whereas no other plasma cutter in this category comes with this feature.
  • This model can cut through the rusty and painted metal surfaces.
  • It has a built-in air compressor.
  • This cutter offers the highest cut thickness in the category.
  • This machine is highly portable and weighs only 29 pounds.
  • It comes with a long cable.

Cons

  • It does not have any extra consumables
  • This cutter has a duty cycle of only 30%.

Hypertherm Powermax30

Why choose Hypertherm Powermax30?

If you are looking for the most excellent plasma cutter, the Hypertherm Powermax 30 AIR is a perfect choice for you.

Made in the USA, the Powermax 30 is the best plasma cutter which has a built-in air compressor. The dual-voltage power capacity of this cutter enables you to cut through almost any material you require to work with.

Duty cycle and Input

This model, with its  240v power capacity, offers a 35% duty cycle, better quality cuts as compared to 120v machines.

This increased power capacity is useful when you need more powerful cutting for your projects.  It can cut through stainless steel sheets endlessly with perfect precision.

Portability and Performance

This cutter can effortlessly cut through 3/8” steel with a speed of 10 inches per minute. For stainless steel, it can slice through a 5/8” sheet at the rate of around five inches per minute.

Its auto-voltage sensing technology automatically keeps track of the power supply and lets you work at a higher speed with less groundwork.

This cutter is a lightweight one with a weight of thirty-five pounds only and thus, suitable for any type of work anywhere you want.

Pros

  • It’s portable and lightweight.
  • It can cut through almost any material.
  • It has dual voltage capacity of 120v and 240v
  • It can cut very fast.
  • You can have its change of parts and consumables even ten years later.
  • This cutter comes with a three years warranty for the power supply, and 1its torch has one year warranty.

Cons

  • This model is too expensive.

Forney 317 250 P+

Why should you choose Forney 317 250 P+?

Forney is a budget-friendly model so, if you want to have a good quality plasma cutter with a built-in compressor.

It can perform almost all the tasks which an expensive cutter will do. It is not as powerful as the first two options of the plasma cutter, but it is good enough to give you the best value of your money.

Portability and Input

Forney works on standard 120v (15A) power supply, and thus, you can plug it in any power outlet. It is highly portable because it weighs only thirty-five pounds.

You can upgrade it to the dual input 230V option also. Moreover, you can switch it to a lower power option for more portability.

Cutting and Torch

This model utilizes drag touch technology. This feature lets the worker move the torch directly across the metal to get more precise and cleaner cuts.

When it comes to the cutting capacities of this model, it can slice through 1/8” materials at a speed of 20”/minute. With a little less speed, it can cut through the metals around ¼” also.

Pros

  • It’s the most cost-effective option available.
  • It offers unique drag torch technology.
  • It cuts every metal.

Cons

  • It takes a while to start after the trigger is pulled.
  • It cuts slower than others.

Lotos LTP5000D Pilot Arc Non-Touch

Why purchase Lotos LTP5000D?

The Lotos LTP5000D Pilot Arc Plasma Cutter is made to give you high-quality cut with portability through its compact body.

The pilot arc of this model makes it fit for use on rough and dirty surfaces for more extended periods. It is very small, so you can use it for domestic purposes.

Input and additional features

It can reach from 110V 50/60 Hz to 220V 50/60 Hz power because of its dual voltage capability with the utilization of pigtail. This model has a digital inverter of 50 Amps.

It has a built-in cooling system and can cut up to a maximum of ¾” thick sheets. This cutter is lightweight and weighs only twenty pounds.

Pilot Arc

This model has a pilot arc and provides high power output to facilitate slicing through thick materials. Lotos LTP5000D plasma cutter comes with power inverter technology, which helps decrease the size and weight of the transformers along with overall efficiency.

Pros

  • Pilot arc cutting involves no-touch technology, and the torch nozzle does not directly touch the surface area you intend to cut.
  • It is compelling and can cut through every type of metal.
  • This cutter is fully automatic and does not require any physical labor for cutting.

Cons

  • It takes a while to adjust the cutting angle correctly.
  • Dragging or touching the nozzle to the surface area can damage it.

Hobart Airforce 250ci 

Why should you purchase Hobart Airforce 250ci

The built-in power compressor provides this model of plasma cutter with the pressure you require for comfortable and quick cuts.

The cutting capacity of this model gets enhanced by the pilot arc along with compressed air. This plasma cutter can cut through the metals sheets with a thickness of ¼”.

Input and Torch

This model comes with an HP-25 torch with 16.5 feet (5 m) cord and consumables. The flame is very fast and effective, which ensures quality work. It uses consumables economically.

The cutter works on a 120V 20A circuit, which is already available in indoor areas. This quality ensures that you do not need to buy pigtails and plugs before learning how to operate a plasma cutter.

Portability

The built-in air compressor and lightweight inverter reduce the measurement of the device to a great extent and make it a very portable one. Its compact design and lightweight make the machine easy to transport anywhere you intend to work.

Pros

  • This model is lightweight and versatile that includes an air compressor.
  • Multiple vents to allow various attachments or functioning cables to join without interruptions.
  • It has the power capacity of 120V 20A for working on standard household current.
  • This model comes with multiple diagnostic LEDs for quick reading of machine status.
  • You can wrap it up quickly by using cable management strap.
  • It has optimized vents along with numerous cooling systems provide excellent cooling.
  • It includes fire and electric shock protection by overheat protection switch.

Cons

  • This cutter has a limited cutting capacity.
  • It is not suitable for advanced users because it lacks customizations.
  • No specific manual comes with the product.

Frequent Asked Questions:

What are the things required to work with The Best Plasma Cutters With Built-In Compressor?

The best thing about these plasma cutters which have built-in compressor is that you need only a power supply source and a plasma cutter unit to start the process of cutting metals.

This quality makes them work in metal cutting field very easy. If you run your business from home and are planning to use a plasma cutter indoors, the only and important thing you require will be to check the suitable power supply and outlet.

Do all these Plasma Cutters With Built In Compressors work like those without one?

It is very little or no difference amongst the ways the plasma cutters with or without the built-in compressor cuts the metals.

The primary difference you need to consider before purchasing a plasma cutter with built-in compressor is to have a look at its output power.

Mostly, cutters with built-in compressor come with too lower output because the unit has to power itself and internal compressor.

Why are the plasma cutters with built-in compressors are expensive as compared to the conventional non-Air compressor plasma cutter?

The plasma cutters with the built-in compressors usually cost more than those without the built-in compressor with the same cutting capacity.

The increase in the price is because this unit comes with a plasma cutter and compressor combined, which affects its price.

What Does “Duty Cycle” Imply  And Why should you Consider It Before Buying A Plasma Cutter?

The duty cycle of an apparatus is a technical term which is used to describe the time a machine can easily work at extreme power in a given amount of time.

Mostly, the duty cycle for plasma cutters is determined by monitoring a ten minute. For plasma cutters, the duty cycle is usually defined based on the particular 10-minute trying period.

The plasma cutter’s duty cycle is usually measured in a percentage. There are chances of a cutter being of poor quality if it does not have a duty cycle score with simple trial parameters.

Conclusion

To sum up, any one of these best plasma cutters with the built-in compressor can be useful for most of the users.

All of them work with regular power supply and can slice through the same thickness of metals.  But the best way to choose the plasma cutter is to think about your requirements before choosing any model.

But if you can spend enough money, we will highly recommend the Hypertherm 088096 Powermax 30 AIR because it is the best model according to our experience.

It performs almost similar to the regular plasma cutters without a built-in air compressor. There is a slight difference of speed between this model and the standard plasma cutters which utilize the external air-compressor.

So, now the choice is yours. There are plenty of other options available for the best plasma cutters with built-in compressors.

Leave a Comment

Pin It on Pinterest