9 Plasma Cutter for the Money

Best Plasma Cutter for the Money

Are you in search of the good plasma cutter for the money? Or, you are new in this field and want to search the best plasma cutters?

Then you have landed at the right place. You can find the best options that are available in the market.

For what purpose Plasma cutters are used? You can use plasma cutters to cut different metals ranging from copper to aluminum to stainless steel without much effort.

The basic function of a plasma cutter is to convert argon, nitrogen, and oxygen to plasma.

In this cutting process, the gas is blown via a small nozzle with the purpose to upsurge its velocity

The gas of high-velocity is then passed from an electric arc for improving the level of temperature to a level that the gas gets altered into a matter form that is named as plasma.

Due to this, a torch that is superheated is produced that is helpful for slicing the metals. Plasma will then occupy the cutting surface, hence, making the entire working process easier.

9 Plasma Cutters for the Money (TOP PICKS)

Plasma Cutter 40A 220V Electric DC Inverter

This 40A model of plasma cutter offers excellent cutting through various metals like carbon steel and stainless steel with a width of 8 mm.

  • It provides a maximum compensation thickness of 12 mm. But the quality of the cut will not be good, and the speed of cutting will also be slow.

This cutter is designed especially for stainless steel variants, but you may use it to slice through aluminum and copper.

The cutting results might not be up to the standard, though. You can efficiently operate the device when the air pressure is tremendously high by regulating the air pressure machine.

The electric circuit of this cutter protects from under and overvoltage. This way, it adds to the longevity of the cutter, which can cut through various types of different metal plates in multiple ways.

What we liked
  • Stellar customer service.
  • This cutter offers protection against the voltage fluctuation.
  • Air pressure can be adjusted.
  • This cutter gives you excellent cutting.
What we didn't like
  • You cannot attach the ground to the cutter steadily.

PrimeWeld Ct520d 50

Selecting Primeweld Ct520d plasma cutter can be the best choice because it offers three diverse combinations in one machine.

You can use this compact machine as either a TIG welder, stick welder, or plasma cutter.

The range of its operational capacity is up to 200 amperes for stick welder and TIG welder whereas 50 amperes for plasma cutter.

You can easily switch between different functions of this cutter. You can use either 110 or 220-volt power options by toggling between both possibilities automatically.

The cutter is portable because it weighs only 36 pounds. You can adjust the welding process using the air gauge.

The power efficiency of 85 % and the duty cycle of 60 % enables the Primeweld Ct520d to cut through the metals with the thickness of up to ½”.

The most prominent feature of this model is the top quality accessories and consumables like electrode holder and TIG torch.

What we liked
  • The three years guarantee covers all the manufacturing facts.
  • You can switch between easily from DC TIG welder to DC Stick welder.
  • It guarantees portability of a high level.
  • Saves money by offering a 3-in-1 combination of machines.
  • Durability in harsh weather conditions is guaranteed.
What we didn't like
  • The instruction manual contains only generic instructions.
  • Automatic cutting is difficult because it does not have a pilot arc.

PrimeWeld Ct520d 50

The Zeny Cut-50 is the best option if you are a DIY hobbyist and require metal sheets cut in a variety of sizes.

This cutter ensures that your metal sheets will not twist, which mostly happens with jigsaw cutters.

The machine comes with an air pressure regulator, welding facemask, a cutting torch LG-40, grounding clamps, wire brush, chipping hammer, air pressure managing valve, and user manual.

This dual outlet cutter does not have a plug or air hose as a part of the package because it works two ways.

This plasma cutter can cut through copper, aluminum, stainless steel, and other metals precisely.

The finishing of your cutting depends on the quality of the metal you want to cut also.

The dirty workplaces will inevitably affect the efficiency of the plasma tip.

This model of plasma cutter can slice through the metal sheets with a thickness of 1-12 mm effortlessly.

You can also use a switch with a margin of 2.5-5 seconds delay and a heavy-duty cord of around seven meters in length.

These two accessories come with the Zeny Cut-50 to increase productivity.

All the features mentioned above make this model of plasma cutter the best choice for light industrial work, automotive, ducting work, sheet metal industry, and repair.

What we liked
  • The portability of this cutter makes it easy to carry and work with.
  • This model of plasma cutter is easier to set up.
  • The price is very economical and suitable for people with a limited budget.
  • You can use this cutter on a range of metals.
  • The cutting results are impressive.
What we didn't like
  • The information in the user manual is given haphazardly.
  • This cutter is not suitable for the metal sheets thicker than 1/2″.
  • The package does not contain a plug and air hose, and you have to buy them separately.

Lotos LT3500 Plasma Cutter

The free and powerful Lotos LT3500 plasma cutter is a perfect choice for you, whether you are a hobbyist or DIY enthusiast.

This model is highly efficient and cost-effective. With a weight of a mere eighteen pounds, this machine is highly portable, and you can transport it easily anywhere you want to work.

The cutter glides through the metal sheets with a thickness of 2 to 5 inches precisely.

Anyone can set up this cutter without using any special skills. Connect the built-in NPT ¼” D plug to the air compressor.

This plug is for industry use. This machine connects with even 110V standard wall power outlet and starts its cutting operations instantly.

This cutter always gives a precise cut because it uses non-toxic compressed air.

This air enables the machine to cut through alloy steel, copper, stainless steel, mild steel, or aluminum entirely.

The pilot arc feature of this cutter allows slicing through the rusted metals and enhances the life of the machine.

This pilot arc comes handy while cutting wires and mesh slots.

The automatic cutter lets you cut your metal sheets without having to stop and start repeatedly.

You have to keep the torch lit throughout the cutting work using plot arc.

This action is necessary because it lets the current pass from the electrodes to the tip without making contact with the sheet you are cutting.

What we liked
  • It contains a high-quality cooling fan system.
  • This model comes with consumables, power supply, ground clamp, power supply, and pre-installed air filter.
  • This cutter is an automatic dual-frequency machine.
What we didn't like
  • The consumables you get from Lotos are costly.

Biltek 50Amp Plasma Cutter

Biltek 50Amp Air Plasma Cutter is an ideal choice if you want to cut through different metals with various thicknesses.

It glides through stainless steel, alloy steel, aluminum, copper and mild steel smoothly.

This model of plasma cutter works through rough, painted, and even rusty metal surfaces and produces minimal rubbish.

This machine works when compressed gas blows towards the workpiece passing through a nozzle at an extraordinary speed.

Such processes form an electric arc within the workplace itself, gas or between the electrodes, which is nearby, or built-in the gas nozzle.

Although working at high speed, this cutter does not produce too much uproar. This quietness in operation saves you from unnecessary noise pollution.

The longevity of this electric cutter depends on the heavy-duty material used in its crafting.

This top-quality material allows the plasma cutter to work efficiently for an extended period even in rough usage.

The Biltek 50Amp Air Plasma Cutter comes with a ground clamp, a cutting torch, an air regulator, an air hose and six extra consumables.

What we liked
  • The non-pilot arc torch increases the longevity of consumables.
  • The cutter can slice through even ½” thick sheet of steel.
  • Latest Inverter Technology promotes a better duty cycle and long-running times without increasing the temperature of the plasma cutter.
  • This model offers an ideal to cut through around 8mm to 10 mm high-quality thick steel and flattering cut of 12mm steel.
  • You can set up and start using your cutter instantly after the purchase because all the necessary accessories come with the cutter.
  • You can use this portable cutter anywhere by just following the manual.
What we didn't like
  • The cutter does not offer a 220V plug within the package.
  • This model of plasma cutter requires a separate supply of air from an air compressor.

PRIMEWELD Premium & Rugged Plasma Cutter

The Primeweld Cut50 inverter-based plasma cutter gives supreme value to your money. This cutter is a highly portable device with a weight of only 22.5 pounds.

However, the weight does not affect its performance because it can slice through ½ inches stainless steel and 5/8 inches mild steel sheets.

Although this model is very economical, yet it provides you extreme flexibility. This feature allows you the perfect control while working with thinner metal sheets.

These qualities make it a favorite model of plasma cutter among the professional metal fabricators and the hobbyists alike.

You can set up the cutter by following the general rules. You may need to incorporate a quality air compressor to ensure the proper working of the cutter.

Absence of the compressor can adversely affect the cutting results. The Primeweld cutter can cut through aluminum, alloy steel, copper, mild steel and stainless steel precisely.

This cutter gives you dual power options of 110V and 220V to choose from according to your requirements.

This model offers you the holistic protection against potential fire hazards and release of toxic gases while working.

What we liked
  • This cutter has a carrying handle, which helps to cut easily.
  • The cutter provides optimal cut for thick and thin, metals alike.
  • Allows the maximum precision while cutting.
  • This model offers one year of torch warranty and three years of manufacturing warranty.
What we didn't like
  • This model does not have CNC control and pilot-arc.

Super Deal DC Inverter

The Super Deal DC Inverter plasma cutter is an excellent option for working in welding industries.

The PRO technology of this model leads to performance that is more consistent.

The high duty cycle of this plasma cutter consumes low power and makes it the best performing and plasma cutter for the money in comparison to the other available options.

This cutter is made of heavy-duty iron and is suitable for professional metal cutting workers or domestic users.

You may use this model for long periods without requiring any machine downtime.

The cutter has a digital LCD, which is easy to read for checking air pressure.

This model saves energy and minimizes the noise to create a peaceful work environment.

This plasma cutter contains a mask and wire within its package, which helps to minimize the minor injuries. It offers you over-heat protection, over and under-voltage protection.

These safety features make this model an ideal pick for metal sheet fabrication, repair, light industrial use, and the automotive industry.

What we liked
  • This model is the best for working with thin metals.
  • It is highly economical.
  • This cutter offers dual voltage operation.
  • Consumes less energy and helps reducing power bills.
  • The LCD is easy to read.
  • This cutter has excellent heat dissipation and long service life.
  • Offers better efficiency due to frequent current regulation.
What we didn't like
  • You have to terminate the cables yourself.
  • This model can cut only up to ¼” thick metal sheets.
  • The cutter does not have pilot arc technology.

SUNCOO Plasma Cutter

This model of 50-amp plasma cutter uses electron circuit for working to produce a regular current output.

You can adjust this output according to the material you want to work with to get the maximum efficiency.

This cutter can handle iron, copper, aluminum, carbon steel, stainless steel, and various other metals.

This cutter has a smooth surface, which makes it easy to reverse the frequency towards a higher level.

This action reduces the voltage to move the current and generate a heavy-duty welding current with its PWM technology.

The dual-voltage capability of this device makes this cutter a multi-functional tool, which is fit for use in sheet metal fabrication, automotive, light industrial usage, and site work, ducting work, and repairing.

You can gauge pressure and control from the LED display. This cutter can cut 1.8 times more speedily as compared to a flame cutter.

The current volume and pressure display after switching on the power button.

You can regulate the gas pressure according to the required level to get the ultra-strong cutting power.

You are suggested to use this cutter within the temperature range of about -10 to40 degrees centigrade to get the best results.

The dampness level of your work surrounding must remain below 80%. Arrange proper ventilation to maximize the output of your plasma cutter.

What we liked
  • Multifunctional usage.
  • It is a portable model.
  • Easy to set up.
What we didn't like
  • Regular maintenance and cleaning are required to keep it working efficiently.
  • It can harden the edge of the material, which is being cut.

F2C 50 AMP CUT50 Plasma Cutter

The F2C plasma cutter can manage all of your welding and metal cutting requirements very easily.

This model of plasma cutter has a duty cycle of 60% and an efficiency of 85 %.

This cutter is the most suitable choice for domestic use and the professional metalworkers who have to cut through a range of metals with various thicknesses for more extended periods.

You may use it in creative art projects or in reducing the nuts and bolts in automotive with the same ease and precision.

This plasma cutter supports both 110 & 220 volts, and you can use the power according to the nature of your task.

It contains a digital display, which makes it even a better choice. You may use it to weld through metals including steel, aluminum, copper, and many more.

The quality of the material you are planning to cut affects the performance of this cutter to a great deal.

This cutter will give you the best results if you use it on clean metal sheets than the rusty metals sheets with lots of impurities.

You can keep the consumables cool using a switch at the front of this cutter. This cooling is done by giving a 2.5- 5 seconds interval of successive cuts.

What we liked
  • This model of plasma cutter comes with a complete kit, and you do not have to buy any consumable or accessory separately.
  • It is a highly portable and cost-effective model.
  • Understanding the controls and setup of this cutter is straightforward.
  • This cutter has a digital readout.
What we didn't like
  • The user manual of this cutter is not very informative.
  • The accessories are of low quality.

Buying Guide: Plasma Cutter for the Money


Not all plasma cutters have built-in inverters, but those cutters, which have usually come with huge price labels.

The function of an inverter is to receive direct current and then feed it via the high-frequency inverter transistor that usually ranges from 10 – 200 kHz, thus increasing its portability.


Those plasma cutters with wall outlets of 110-220V are relatively less costly but have limited operating functions as well.

Those plasma cutters having hefty prices can work best on 220-240 V and can cut thick metals. The metal thickness is determined through the power specs of the cutter.


Plasma cutters for creating cutting arc need electric current and it is measured in amperage.

Customers should match metal thickness with amps along with power source. There is a positive correlation of cutting speed with amperage

Metal Thickness

For a metal of thickness ¼ inches, 25 amps are enough, while for slicing the metal of ½ inch, 50 amp is required, whereas, for a metal of 1-inch thickness, 80 amps are necessary.

Controls & Indicators

There should be a power switch in all kinds of plasma cutters along with a few other ways of current adjustment settings based on the kind of metal that is being cut.

There are LED indicators in modern plasma cutters. This indicator is present at the panel’s front that makes it easier to real all signals, though; such cutters are costly due to these indicators.

Duty Cycle

Those plasma cutters that have high output amperage give high duty cycle, which can cope with your needs if you planned to work more hours.


You must choose a plasma cutter, which suits your requirements and is within your price range. All of the cutters, as mentioned above, come under $ 500 and are a good value for your money.

All of them are good choices in quality, proficiency, and reasonableness. But every machine has pros and cons so, choose the most suitable option wisely.

You may consider the ease to operate, the quality of cut, and the compatibility of the cutter with your requirements before making the purchase.

However, Lotos CT520D Plasma Cutter is our recommendation because of its quick and precise cutting at high frequencies.

The versatile combination of Plasma Cutter, Tig Welder, and Stick Welder makes Lotos Technology NC-FXDR-KJUX CT520D an excellent tool for the small businessmen and DIY hobbyists alike.

If you want to buy the plasma cutter for the money with tig and stick welding functions, runs on 110 and 220 volts power, portable, and does nit cost you a fortune, this cutter is an ideal choice for you.

Leave a Comment

Pin It on Pinterest