9 Best Plasma Cutters Under $500

Lotos LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter, Dual Voltage 110V/220V, 1/2 Inch Clean Cut, Brown

Why go overpriced when you can get the good plasma cutter under $500? Of course, you’ll get lots of necessary and best functions to get the job done, with 100% satisfaction 🙂

Last week I received many emails. Few people were asking about plasma cutter under 500. My team spent lots of hours researching. Finally, we picked 9 best plasma cutters which are best for everybody having a budget under 500.

Best Plasma Cutter under $500 [Top Picks]

Lotos LTP5000D 50Amp Plasma Cutter

Lotos LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter, Dual Voltage 110V/220V, 1/2 Inch Clean Cut, BrownCheck Price on Amazon
What we liked
  • Includes non-touch technology where the torch nozzle does not have to come in contact with the surface area being cut.
  • Very efficient.
  • Powerful enough to cut through both thick and thin metals.
  • It is fully automated and requires no labor in cutting.
What We didn't like
  • During cutting the touching or dragging nozzle to the surface area can cause damage to it.
  • It requires a great time cutting the angle right.
[expand title=”Click for Full Review” trigclass=”med_with”]

The Lotos LTP5000D Pilot Arc Plasma Cutter is intended to convey top quality administrations that meet up in a convenient and smaller body.

It accompanies a pilot bend include is especially valuable when utilized consistently on an unpleasant or filthy material. Lotos’ LTP5000D is sufficiently minimal for DIY extends at home or private venture ventures.

This non-touch pilot circular segment plasma shaper offers high power yield which encourages the cutting of thick materials and conveys an enduring force yield for thin materials.

Lotos LTP5000D plasma shaper has been planned to utilize switch control inverter innovation. It decreases the weight and size of the transformers and general productivity is fundamentally moved forward.

You can cut a wide range of materials like stainless steel, metal, aluminum, copper, compound steel, and different sorts of conductive materials.

All the more essential, this can be accomplished with controllable head input and without contorting or changing the state of the metal.

While it is intended for DIY clients, it can oblige the necessities of an expert also. This is a Digital inverter plasma cutter of 50 Amps. It has been planned with a propelled cooling framework.

It can slice up to a most extreme severance thickness of 3/4-inch. The item weighs up to 20 pounds.



Goplus Cut-50 50A 220V Electric Plasma Cutter DC

Goplus CUT-50 Electric Digital Plasma Cutter Inverter 50AMP 110-220V Dual Voltage Welder Cutting with Free Mask (Black)Check Price on Amazon
What we liked
  • It’s perfect for cutting metal materials.
  • Good value for money
  • It’s easy to use, lightweight and requires less effort.
  • Highly recommended for beginners.
What We didn't like
  • This machine is indeed workable for beginners but not for the professionals, as they need some high quality models to carry out their work.
  • Due to its very low price, it is obviously not comparable to more expensive, higher-quality models, but it does get the job done.
[expand title=”Click for Full Review” trigclass=”med_with”]

Goplus Cut-50 50A 220V Electric Plasma Cutter features the most advanced inverter technology.

It is perfect for the handling of metal materials apparatus. The plasma cutting is furnished with a brilliant plasma burn that grew particularly to upgrade and enhance the cutting quality.

It is reasonable for an extensive variety of utilization including sheet metal manufacture, light modern utilize, site work, car, ducting work, and repair and upkeep administrations.

What’s more, it will empower you to get an expert complete in cutting. The cutting machine use in organizations and DIY clients as well as completely pleasing the requests of expert administrators.

With this cutting unit, you would now be able to encounter numerous favorable circumstances of the cutting procedure.

The design of Goplus Electric Plasma Cutter is fine comprises of Iron body, firm and durable, lightweight with a comfortable handle, and small size. It’s easy to carry and it comes with wire and mask.

It is energy-saving and no noise. It performs a simple operation, cuts the surface smooth with high cutting speed.

It is suitable for cutting stainless steel, alloy steel, mild steel, copper, and other color metal materials. It regulates the current continuously and corrosion-resisting. It is safe and reliable.

It requires less cleaning, less maintenance, less noxious gases, and fire hazard is also less, simply less overall work and a better cleaner cutting.



ZENY DC Inverter Plasma Cutter 50AMP CUT-50

ZENY DC Inverter Plasma Cutter 50AMP CUT-50 Dual Voltage 110-220V Cutting MachineCheck Price on Amazon
What we liked
  • It’s good for cutting hard metal materials.
  • Good value for money
  • It’s easy to use, lightweight and requires less effort.
What We didn't like
  • More load and more voltage will cause severe damage to the machine.
[expand title=”Click for Full Review” trigclass=”med_with”]

ZENY DC Inverter Plasma Cutter is the most recent innovation, it is ideal for the preparation of metal materials apparatus. The Plasma Cutting is outfitted with a top-notch Plasma Torch grew particularly to upgrade and enhance the cut quality.

It is reasonable for an extensive variety of uses including sheet metal creation, light modern utilize, site work, car, ducting work, repair, and upkeep administrations.

The cutting machine use in organizations and DIY clients as well as completely pleasing the requests of expert administrators.

The CUT50 Plasma Cutters are made by global most advantaged alter specialized. 50Hz/60Hz recurrence is transformed to high recurrence by V-MOSFET, at that point advance down voltage and correction current, inverter control supply creates intense DC welding current through PWM specialized.

Since the inverter specialized of switch control is utilized, measurements and weight of principle transformer have lessened generously and productivity has expanded 30%.

The ZENY DC Inverter Plasma Cutter 50AMP CUT-50 Dual Voltage 110-220V Cutting Machine is light and its structure is smaller and the electromagnetic fields created the high presently.

So normal breeze isn’t fulfilled to chill off segments, there is two pivotal stream fan in between machine keeping in mind the end goal to power to chill off it. The guiding curve framework can hit the circular segment effectively with the rule of high recurrence swaying.

It has capacities that it can supply gas ahead and kill gas postponed. The CUT50 plasma cutting machine can be utilized generally. It is reasonable for cutting stainless steel, composite steel, mellow steel, copper, and other shading metal materials.



Lotos LT3500 35Amp Air Plasma Cutter

Product Name: Lotos LT3500 35Amp Air Plasma Cutter, 2/5 Inch Clean Cut, 110V/120V Input with Pre Installed NPT Quick Connector, PortableCheck Price on Amazon
What we liked
  • The LT3500 is a great choice for the cost conscious DIY specialist.
  • It is a compact cutter, good for light cutting.
  • It’s easy to use, recommended for beginners.
  • It’s lightweight and requires less effort.
  • This plasma cutter is fully automated.
  • It’s very affordable
What We didn't like
  • It is not suitable for cutting thick metals.
  • More load and more voltage will cause severe damage to the machine (A tendency to overheat).
  • This machine is indeed workable for beginners but not for the professionals or not meant for heavy-duty cutting.
  • It includes a short ground cable which is not sufficient
[expand title=”Click for Full Review” trigclass=”med_with”]

The Lotos LT3500 Plasma Cutter is intended for light cutting tasks. This unit is the most minimized plasma shaper one can discover in the market and weighs just 8kg (17.6lbs).

Meanwhile, this capable unit is sufficiently capable to cut 10mm (2/5inch) metal with 15mm (3/5inch) severance thickness, settling on it a perfect decision for cost cognizant DIY specialists.

The LT3500 is like the LT3200 aside from it has a higher amperage go up to 35 An under 110 V, has a pre-introduced air channel and air measure prepared to be associated your air compressor with the stand NPT 1/4 inch industry write D coupler that can be set up rapidly inside 2 minutes.

This type of cutting is suitable for Alloy Steel, Stainless Steel, Mild Steel, Copper, Aluminium, etc. It uses non-hazardous compressed air for cutting which is safe and requires little to no effort.



Super Deal Cutting 50AMP Plasma Cutter CUT-50

SUPER DEAL DC Inverter Plasma Cutter Welding Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean Cut (CUT 50)Check Price on Amazon
What we liked
  • Super Deal Plasma Cutter is available in a lightweight design and thus it is portable.
  • It delivers fairly impressive cutting results regardless of its low cost.
  • Whether you are a professional or not you will be able to install this machine by yourself as it is quite easy to install.
  • It can be used to cut different kinds of metals.
What We didn't like
  • Super Deal Plasma Cutter is not suitable for high quality cutting or cutting of metals with thickness greater than 1/2 inch.
  • The user manual of this product is not well organized even though it is written in English but you can get a complete understanding of the product through online forums or YouTube.
  • To get effective results from this product you need to purchase your own air hose and plug, which will definitely be additional expenses.
[expand title=”Click for Full Review” trigclass=”med_with”]

Super Deal plasma cutter is a cutter that you should know particularly in the event that you are on a spending plan.

It is additionally a possibility for any specialist whose activity requires the cutting of meet metal sheets of various sizes as it is made to cut diverse sizes of metals.

Instead of utilizing a dance saw for cutting the metal, you can utilize CUT-50 as it will give a cleaner cutting.

Zeny CUT-50 is an auto double outlet machine inferring that it works in two ways. This clarifies why the machine does not accompany attachment or air hose. Be that as it may, on the off chance that you require a fitting or an air hose, you can buy it without anyone else’s input.

The attachment isn’t costly to buy and considering the cost at which the cutter is sold, the nonappearance of the fitting is an immaterial blemish.

On the off chance that you are acquiring a fitting, you should purchase either a 110 or 220v attachment. Everything depends upon your needs.

The Super Deal Plasma Cutter Cutting 50AMP CUT-50 Digital Inverter 110-220V Welding Welder Cutting Machine Dual Voltage w/ Free Mask is certainly that and will be a great purchase.

The slicing exactness and result depend on a specific degree on the tidiness of your work material that is on the neatness of the metal that you are cutting.

You will acquire a cleaner and better cutting outcome if the metal you are dealing with is perfect. In the event that the workpiece is soil, it will ponder the plasma tip.

Be that as it may, regardless of how clean the workpiece is, the cutter will have the capacity to slice through it seeing that the thickness is inside the cutting thickness scope of 1-12mm.

This plasma additionally includes a switch for a postponement of 2.5 and 5 seconds. A substantial obligation rope of around 7 to 8 feet long is connected to the cutting light.



SUNGOLDPOWER 50A Air Plasma Cutter Inverter 

SUNGOLDPOWER 50A Air Plasma Cutter Inverter DC Digital Display IGBT Portable CUT50 Welding Portable Machine Cutting 50Amp Dual Voltage 110V and 220VCheck Price on Amazon
What we liked
  • SUNGOLDPOWER CUT50 plasma cutter produces no noise.
  • It saves energy and has a high cutting speed.
  • It provides a great shield from electric shock.
What We didn't like
  • SUNGOLDPOWER CUT50 plasma cutter is unable to cut the surface that is thicker than 15mm.
[expand title=”Click for Full Review” trigclass=”med_with”]

The SUNGOLDPOWER CUT50 plasma cutter is one of the numerous units that convey a “CUT50” sign. They all deliver a yield current of up to 50 amps, they are all inside a similar value range, and the vast majority of them are either blue or yellow.

This show is blue, however, what separates it from other comparable models is that it has an advanced LCD show. You can run it at 110 volts, yet the information voltage can go up to 220 volts when you’re cutting thicker surfaces.

The cuts can dive as deep as 15 millimeters. Extra upsides to this model are its vitality proficiency and the way that it delivers no commotion while working.

Similar to the case with the dominant part of less expensive models, this one accompanies a 1-year guarantee and only an essential arrangement of extra consumables.

It includes IGBT soft-switch technology which provides more stable performance, peak current capabilities, forward resistance, and temperature drift, switching speeds and response time, logic level switching and isolation, gate capacitance oscillation, cost-effectiveness at higher voltages, heat dissipation requirements and this technology is more powerful than MOSFET technology.

IGBT machine is far superior and more stable than the MOSFET machine. The MOSFET Cut50 can only cut max 12mm, but our IGBT machine can cut max 15mm. The high duty cycle results in less power consumption.

More economical and efficient than the traditional cutting machine due to the high speed, high temperature, and high energy plasma draught.

It includes an adjustable cutting current to satisfy the cutting demands based on different kinds of material and thickness of the working plate.

Max cutting thickness is 15mm, Suitable for cutting Stainless steel, copper, iron and aluminum metal, etc. Built-in over-heat protection, over-voltage protection, under-voltage protection and overheat protection and lack of compressed air pressure protection.

Overcurrent and air pressure, light indicators keep you updated on your units operating condition. It provides strong interference resistance, stable cutting current, and steady.

It includes continuous current regulation, waterproof shield from electric shock. It requires less maintenance, less cleaning and releases less noxious gases and it is less hazardous.



PrimeWeld CT520d 50Amps Plasma Cutter

Lotos CT520D 50 AMP Air Plasma Cutter, 200 AMP Tig and Stick/MMA/ARC Welder 3 in 1 Combo Welding Machine, ½ Inch Clean Cut, BrownCheck Price on Amazon
What we liked
  • PrimeWeld CT520d is a compact cutter.
  • It is efficient and portable.
  • It is lightweight and easy to use.
  • It’s a 3 in 1 plasma cutter, provides plasma cutting, TIG/stick, and arc welding functions.
What We didn't like
  • PrimeWeld CT520d creates problems when cutting more than 1/2 of inch.
[expand title=”Click for Full Review” trigclass=”med_with”]

PrimeWeld CT520d 50Amps Plasma Cutter is a multipurpose unit that 3 out of 1 offers an assortment of various welding and cutting capacities.

It can cut different sorts of metal up to 1/2″ with the 50A plasma cutting capacity. Furthermore, this unit has worked in DC TIG welder and DC STICK welder.

With a hand conveying weight at 32lbs, this unit is convenient and solid highlighting an obligation cycle of 60% at max amps on all procedures.

This cutter combines plasma cutting, TIG/stick, and arc welding functions, it is 3 in 1 plasma cutter, so it is really a good welding machine for multiple purposes.

Plasma cutter works like a charm on steel and aluminum, sure beats firing up the cutting torches or replacing cutting discs on my grinder.



Lotos CT520D Plasma Cutter

Lotos CT520D 50 AMP Air Plasma Cutter, 200 AMP Tig and Stick/MMA/ARC Welder 3 in 1 Combo Welding Machine, ½ Inch Clean Cut, BrownCheck Price on Amazon
What we liked
  • CT520D’s voltage and frequency will adjust automatically to different voltage and frequency inputs, so you don’t need to worry about changing those values when working in different situations.
  • CT520D also requires less maintenance and cleaning than other welding equipment in the market.
  • The 3 different features are combined in this machine which makes it very interesting and those are cutting, tig welding, and stick welding, they will allow you to concentrate only on the job being done, instead of about switching machines to suit what you want to do in every type of job and it means that many of your welding needs will be covered by this machine alone.
  • This machine is extra efficient and it releases less harmful gases, which are dangerous for your health, and the risk of a fire breaking out will be diminished.
  • As CT520D’s energy supply system is air-based and it uses air or argon depending on the functionality which means that this will be a much cheaper and cleaner machine than other oil supply machines.
What We didn't like
  • The major disadvantage of this machine is that the cutting is limited to around 1/2 inches, which means if you need to cut more than this specified size, you will need a different machine.
  • A foot pedal is not included in this package users can buy a compatible foot pedal from the company to make working with this machine easier and to fix this issue.
  • However, adding such items will definitely increase the price significantly while still being a cheaper option than other welders in the market.
[expand title=”Click for Full Review” trigclass=”med_with”]

Lotos CT520D plasma cutter, Tig Welder, and Stick Welder are a 3 in 1 multipurpose machine that will deliver high-quality products, no matter what you are using it for; you will be able to cut, tig, stick, and weld.

The current output of this plasma cutter is 50AMP. The maximum ideal cut thickness of the Lotos CT520D is 1/2inch and the maximum severance thickness is 3/4inch.

It is a compact plasma cutter and has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum. It has 15-200AMP DC TIG electric current output.

It provides quality TIG welding on stainless or steel and precise welding of thinner-gauge materials.

Both TIG and HF start hand torch control and support precise foot pedal welding heat control (foot pedal is NOT included). It is very powerful and generates 15-200AMP DC Stick/MMA Electric Current Output.

It includes easy arc start, stable welding arc, deep weld pool, and beautiful welding shape.

It also provides adjustable hot striking arc current which can greatly improve the arc-starting function which is suitable for welding with different kinds of acid or basic electrodes.



What is Plasma Cutting?

Plasma cutting is a procedure that cuts through electrically conductive materials by methods of an accelerated jet of hot plasma.

Typical materials cut with a plasma torch include steel, Stainless steel, aluminum, brass, and copper, although other conductive metals might be cut too.

In this article, we discussed the plasma cutter under $500 which is going to be much helpful for the people who want the plasma cutter at a reasonable price. 🙂

Plasma cutting is often used in fabrication shops, automotive repair and restoration, industrial construction, and salvage and scrapping operations and for all these purposes a person must possess solid knowledge about the plasma cutter.


What to look while buying the Plasma cutter under $500?

There are various elements to be considered when acquiring plasma cutting machines. They incorporate cut limit, cut quality, dependability, obligation cycle, convenience, and working expense.

The initial step is to make sense of what kind of plasma slicing you intend to do. Is it true that you are intending to cut by hand or on a table?

Some plasma cutting apparatuses can do both, going from handheld to motorized curtailing once more.

A couple of frameworks incorporate a CNC interface and inside the voltage divider, giving more alternatives to motorized applications.

When you realize what sort of plasma slicing you will do, at that point you ought to consider the thickness of the material you intend to cut.

Generally, it’s required to pick a framework with a prescribed cut limit that matches the material thickness you intend to cut 80 percent of the time.

[expand title=”Click for Full Review” trigclass=”med_with”]

For instance, on the off chance that you predominantly plan to cut 1/2inch thick metal, and just every so often cut metal that is somewhat thicker (say 3/4 of an inch), at that point, you can pick a 1/2inch framework.

Cut quality is another essential thought. Not exclusively does it affect the nature of your completed piece, it spares time in later phases of creation.

In a perfect world, you need a spotless, smooth edge so you don’t invest a great deal of energy in optional work.

Notwithstanding smooth, clean cuts, better plasma cutting frameworks make a much smaller kerf (cut width), which implies more exact cuts and less squandered metal.

You ought to likewise think about unwavering quality. All in all, the most dependable plasma cutting frameworks are designed with fewer parts, utilize programming rather than equipment where conceivable, are fabricated to ISO norms, and are satisfactorily tried.

Consider a brought together fan design to get cool air through the focal point of the framework, where the most thermally delicate segments are found.

This will bring about more effective and predictable cooling and empower a higher obligation cycle. Some plasma slicing devices are less demanding to use than others.

Clearly, for an accomplished administrator, usability enables an occupation to be done quickly and all the more effective. However, it might likewise imply that individuals with next to zero experience can get great outcomes.

Despite encounter level, make sure that administrators utilizing plasma cutting apparatuses can land positions finished rapidly and with great quality, keeping time-touchy tasks on the plan.

On the off chance that you intend to move around a considerable measure or do any work far from your shop, at that point size and weight will assume a part in your choice.

Designing advances mean you would now be able to get a lightweight framework without yielding force and execution. Certain plasma cutting frameworks likewise accompany innovation that consequently alters for various voltages and voltage varieties, which is great in the event that you intend to work off a generator.

Finally, you ought to think about working expenses. Cut quality, cut speed and execution assume a part here however so does plasma consumable cost.

Plasma consumable life can differ altogether from one brand of plasma slicing framework to another. Longer plasma consumable life is vital as it decreases downtime for change-outs and brings down the cost you pay for new plasma consumables.

Numerous brands utilize licensed innovation to broaden plasma consumable life, while additionally conveying top-notch cuts.

If you are tired of cutting metal with an angle grinder or oxy-fuel torch then you can choose plasma cutter from this article which consists of a list of plasma cutters under $500 from the cheapest to most expensive.




It’s important for you to pick the plasma cutter that fits both your financial plan and your necessity. As we have discussed the plasma cutter under $500 and the whole list that came under this heading is a good value for money.

Although each machine discussed above has some advantages and disadvantages, so you have to choose wisely according to your requirements.

The basic leadership process lays on an assortment of elements, the primary need being the nature of the cut, the convenience, and the reasonableness of the hardware.

We have evaluated 9 products in the list of the plasma cutter under $500 according to the privilege that satisfies the terms of proficiency, quality, and reasonableness.

In any case, as far as the esteem accommodated the value, we prescribe Lotos CT520D Plasma Cutter. It conveys quick and exact cutting at high frequencies.

Lotos Technology NC-FXDR-KJUX CT520D Plasma Cutter, Tig Welder, and Stick Welder is a great piece of equipment for both individuals doing DIY home projects and small business owners.

If you are looking to invest in a great plasma cutter, which will also allow you to tig and stick weld, supports both 110 and 220 volts, it is very powerful but will not require a big space to be used, and that has a price tag that will look after your budget, then this might be the machine you were looking for.

2 thoughts on “9 Best Plasma Cutters Under $500”

  1. Hey

    Thank you for this amazing article! It has opened up my mind about the best plasma cutter tools.

    I have read your entire article. The tools you have discussed for tools in this article are very important to us. As a carpenter, I can say that this article is very useful for everyone. Thank you very much.


Leave a Reply to Casey Maxwell Cancel reply